Long strand glass fibre needlemat faced on one side with reinforced aluminium foil and self adhesive backing on reverse side. Approx 7mm thick.
Provides both thermal and acoustic insulation.
The reflective face can withstand radiant heat up to 250 degrees centigrade while the adhesive backing can be used at continuous temperatures up to 180 degrees centrigrade.
Sheet size approx 1.6mtr x 1mtr

 

Quantity:  

Long strand glass fibre needlemat faced on one side with reinforced aluminium foil and self adhesive backing on reverse side. Approx 7mm thick.
Provides both thermal and acoustic insulation.
The reflective face can withstand radiant heat up to 250 degrees centigrade while the adhesive backing can be used at continuous temperatures up to 180 degrees centrigrade.
Half sheet size approx 0.8mtr x 1mtr

 

Quantity:  

Long strand glass fibre needlemat faced on one side with reinforced aluminium foil and self adhesive backing on reverse side. Approx 7mm thick.
Provides both thermal and acoustic insulation.
The reflective face can withstand radiant heat up to 250 degrees centigrade while the adhesive backing can be used at continuous temperatures up to 180 degrees centrigrade.
Pad size approx 0.40mtr x 0.50mtr

 

Quantity:  

Flexible high temperature insulation. Woven glassfibre sheet laminated to heat reflective aluminium foil. Approx 1mm thick. Used as a heat shield, the barrier should be installed with the highly reflective metal surface facing the heat source. 1mtr (39") wide. We have made a bulk purchase at a very good price so can offer this at almost half price!! Regular price is £58.72/mtr

 

Quantity:  

61cm x 122cm (24" x 48")
Supplied as approx 10mm (3/8") thick but will compress.
New composite thermal/sound insulation that reduces engine heat/noise when fitted to bulkhead/firewall.
Also under bonnet and above transmission housings.
Very durable resin bonded silica blanket sandwiched between outer reflective facings of Mylar and foil.
Stiffer and thicker side to face heat and it can be layered if required.
Push in fasteners supplied or use 259 adhesive.
Edges can be bound using 368 Thermo shield tape.

Quantity:  

25mm (1") wide x 15.23mtr (50ft) long 1.5mm (1/16") thick. For wrapping around exhaust manifolds and down pipes. Asbestos free, silicon based wrap. Reduces under bonnet heat by up to 70%, increasing power and efficiency.

 

Quantity:  

50mm (2") wide x 15.23mtr (50ft) long 1.5mm (1/16") thick. For wrapping around exhaust manifolds and down pipes. Asbestos free, silicon based wrap. Reduces under bonnet heat by up to 70%, increasing power and efficiency.

 

Quantity:  

Foil coated 12mm thick acoustic foam Fire retardant (FMVSS302) Heat reflective foil facing bonded to acoustic foam which is in turn bonded to a self adhesive sound and vibration damping sheet. To reduce both panel resonance, heat and sound. Now in larger sheets - 1.5mtr x 1mtr.

 

Quantity:  

Self adhesive roll 38mm (1 1/2") wide x 4.57mtr (15ft) long. Approx 1mm thick. Very flexible high silica fibre with metallised mirror finish. For wrapping/protecting any hoses, fuel lines, wiring etc from damaging engine/exhaust heat. Can be fitted in-situ without removal/disconnection of components.
Also ideal for binding edges of 367 and 369

Quantity: