Small 'U' section. 10mm (3/8") tall with approx 1.5mm (1/16") gap.

 

Quantity:  

U' section. Overall length 17mm (11/16"). Internal width of 2mm (approx.1/16").

 

Quantity:  

U' section channel. For 6mm (¼") glass. 10mm (3/8") wide and 13mm (just over ½") tall.

 

Quantity:  

'U' section with single flap. For 6mm (¼") glass. 10mm (3/8") wide and 12mm (½") tall. Flap extends approx 12mm (½").

 

Quantity:  

'U' section with long single flap. Used mainly as a window section. 5mm slot approx 12mm (½") deep.

 

Quantity:  

8mm (5/16") round section with slot 1.5mm (1/6") wide.

 

Quantity:  

T' section seal. Suitable for opening screen. Overall length 23mm (15/16") with head of 'T' approx 6mm (¼").

 

Quantity:  

'T' section seal. Suitable for opening screen. Overall length 21mm (13/16") with head of 'T' approx. 7mm.

 

Quantity:  

T' section seal. Suitable for opening screen or quarterlight. Overall length 16mm (5/8") with head of 'T' 9mm (3/8") across.

 

Quantity:  

T' Section seal, usually for opening screens on vintage cars. Overall length 21mm (13/16"). Head of 'T' is 6mm (¼").

 

Quantity:  

Piping. Overall 35mm (1 3/8") long. Hollow bead 9mm (3/8") dia.

 

Quantity:  

Piping. Overall 35mm (1 3/8") long. Bead approx. 5mm (3/16").

 

Quantity:  

Small piping. 28mm (1 1/8") overall width with 3mm (1/8") offset bead.

 

Quantity:  

T' Section. Usually to seal between bottom of screen and scuttle. Overall length 35mm (1 7/16"). Head of 'T' is 8mm (5/16").

 

Quantity:  

Rounded 'T' Piping. Overall height 28mm (1 1/8"). Width of 'T' approx. 13mm (½").

 

Quantity:  

Bonnet rubber. Used at bulkhead end of bonnet, bonnet tape sits on flat section and the rounded end lips over the scuttle. Overall length 30mm.

 

Quantity:  

Split Tube Rubber Draught Excluder. As used on the MG 'Y' type, Morris series 'E' and similar. Use on its own or wrap 306 coach lacing around for a better finish. Approx 30mm (1 3/16") wide with 13mm (½") bead.

 

Quantity:  

'L' section rubber. Outside lengths 17mm x 9mm (11/16" x 3/8").  Please note this product will not be a perfect L shape when you receive it, the best way to describe it is that it looks 'wobbly' but when attached to an edge or held in place it does form the L shape as shown.

 

Quantity:  

Small 'h' section. To fit onto edge of metal. Flap sticks up approx 6mm (¼").

 

Quantity:  

Filler strip style rubber. 12mm (½") wide (leg to leg). 8mm (5/16") tall.

 

Quantity: